Publicité
Les langues disponibles
Les langues disponibles
c) Use of device :
Elements of command and display
Command/Display
Thermostat (n°2 on picture)
Orange pilot light
(n°3 on picture)
Green pilot light
n°1 on picture)
Putting on
Turn on the thermostat control knob (n°2 on picture) on the wished position: the
green pilot light (n°1 on picture) ignites. The machine is warming up.
Once orange pilot light (n°3 on picture) is off, the machine reached the wished
temperature.
Temperature setting
Set the temperature by positioning the thermostat (n°2 on picture) to the desired
temperature. The orange pilot light (n°3 on picture) switches on if a higher level of
temperature is required and switches off when the same is reached.
It is not necessary to leave the device switched on at full power. Temperature
has to be adapted to products to be reheated to limit the energy consumption.
Stopping the appliance
Set thermostat control knob (n°2 on picture) on 0: the appliance is no longer func-
tioning.
Let the device cool
Disconnect the power cable.
Clean the appliance. (see 6. Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him the
complete reference of your device (commercial name, type and serial number). This
information appears on the visible descriptive plate behind the device.
Function
On/off + Temperature setting
Machine is heating (pilot light on)
Temperature reached (pilot light off)
Machine on (pilot light on)
Machine off (pilot light off)
17
Publicité
