Publicité
Les langues disponibles
Les langues disponibles
4. WAY OF FUNCTIONING
This crepe machine is fitted with glass ceramic plate. The glass surface of the plate
ensures an homogeneous cooking and a temperature stability. The plate's smooth
surface provides direct heat transfer to the food being cooked, without heat loss at
the centre as in the periphery thanks to the ceramic chamber under the glass ceram-
ic plate that cover the entire cooking surface.
To turn on and preheat the plate, just turn the thermostat control knob (n°2 on pic-
ture) on the wished position. The orange pilot light ignites (n°3 on picture), the crepe
machine is heating. When it switches off, the device is ready for the cooking.
During use, the temperature can be regulated thanks to thermostat control knob (n°2
on picture) to avoid phenomenon of overheating. Orange pilot light (n°3 on picture)
indicates heating periods.
Reheating is made at a temperature around 200-220°C.
1
1
On/off pilot light
Thermostatic pilot light
3
2
3
Thermostat / commutator
2
15
Publicité
