Publicité
Les langues disponibles
Les langues disponibles
The operation indicator light turns off.
•
To continue to heat and froth, press the ON/OFF button again:
- briefly, if you want to heat and froth
- for a long time, if you want to froth without heating.
Turn off the appliance
•
To completely disconnect the appliance from the power supply after use, remove the plug
from the electrical outlet.
SAFETY DEVICES
If the appliance has been switched on empty, after about 30-40 seconds it will automatically
switch off to avoid overheating. Any intervention must be carried with cold appliance.
CLEANING
Danger - risk of death by electric shock
Unplug it from the electrical outlet before cleaning the appliance.
The base, the plug and the power cable should not be exposed to moisture. These parts
must also be protected against possible splashes or drops of water.
The container must never be immersed in water or other liquids. Water must never pene-
trate in the electrical components.
Warning – material damage
For cleaning do not use any chemical, abrasive or aggressive detergent.
After each heating and frothing process immediately clean the container, in order to avoid
that milk dries inside it.
1.
Unplug it from the socket-outlet.
2.
Remove the sealing ring from the lid and remove the insert from the sleeve into the con-
tainer.
3.
Wash the lid, seal ring and inserts with warm water and a dishwashing liquid.
4.
Only wash the inside of the container with warm water and dishwashing liquid.
5.
If necessary, clean the base with a slightly damp cloth.
6.
Carefully dry all parts, especially the container to avoid the formation of stains.
7.
Re-insert the seal ring in the groove of the lid.
15
Publicité
