Publicité
Les langues disponibles
Les langues disponibles
SAFETY INSTRUCTIONS
•
Carry out testing and inspection of vehicles only in a safe
working environment and in safe conditions.
•
Never attempt to use or read the product while driving or
manoeuvring the vehicle – risk of fatal or serious personal
injury.
•
Wear safety glasses that comply with the requirements of
ANSI.
•
Only work outdoors or in a well ventilated area – risk of
personal injury or death from inhalation of exhaust fumes.
•
Apply the parking brake. If the vehicle has an automatic
gearbox put it in P (parking), if it has a manual gearbox put
it in neutral.
•
Only work outdoors or in a well ventilated area – risk of
personal injury or death from inhalation of exhaust fumes.
•
Pay attention to moving parts (fan, auxiliary drive etc.) when
the engine is running – risk of serious personal injury.
•
Internal combustion engines get very hot when they are
running – risk of burn injury.
•
The engine and ignition must be switched off when
connecting or disconnecting the test equipment, otherwise
the test equipment or electronics in the vehicle can be
damaged. Switch off the ignition before connecting the fault
code reader to, or disconnecting it from, the Data Link
Connector (DLC).
•
Fuel and battery fumes are highly flammable. Keep sparks,
hot objects and naked flames away from the battery, fuel
system and fuel fumes to minimise the risk of explosion. Do
not smoke near the vehicle when testing is in progress.
EN
73
Publicité
