InnoCigs PRESENCE Manuel D'utilisateur page 52

INNOCIGS PRESENCE – USING THE DEVICE
Changing the Clearomizer Coil (2)
Remove the InnoCigs Presence clearomizer tube by unscrewing it above the battery. The clearomizer head is located at the bottom of
the tank. For changing or cleaning, easily pull the coil from its fixing point.
Please note the following
Prior to first use, drip a few drops of your e-liquid onto the atomizer head. Open the Airflow Control and inhale through the mouth-
piece for 4 to 5 times WITHOUT holding the fire button. Then let sit for 15 minutes to be totally soaked before first use.
Do not clean the clearomizer coil with water. If necessary, only wipe it with a dry cloth. Since clearomizer coils are a wearing part, we
recommend regular exchange. Please consider the notes prior to first use of coils.
50
50