Advanced Settings (Parameter Mode); Basic Operation In Parameter Mode; Saving The Settings (Write Function) - Roland PK-6 Mode D'emploi

6.

Advanced settings (Parameter mode)

Parameter mode lets you make various settings for this unit.

Basic operation in Parameter mode

Here's the basic procedure for making settings in Para-
meter mode.
1.
Press the [SHIFT] footswitch to activate
Shift mode (secondary footswitch func-
tions).
The [SHIFT] indicator lights.
The display shows:
---
2.
Press the [HOLD/PARAMETER] (HOLD)
footswitch.
The [PARAMETER] indicator flashes.
The PK-6 is now in Parameter mode. The display
shows:
rEt
Dynamic MIDI Pedal PK-6
Advanced settings (Parameter mode)
3.
Press the [OCTAVER BASS/DOWN] or [POR-
TAMENTO/UP] footswitch to select the desi-
red parameter.
For details on each parameter, refer to "Parameter
settings" auf S. 24.
4.
Press the [ENTER] pedal to confirm.
The display shows the value.
5.
Press the [OCTAVER BASS/DOWN] or [POR-
TAMENTO/UP] footswitch to change the
value.
For certain parameters, you can also use the pedals
labeled [0]~[9] to enter the desired value.
6.
Press the [ENTER] pedal or the [SHIFT]
footswitch to confirm the value and leave
Parameter mode.
Saving the settings (Write
Function)
When the PK-6's power is turned off, it will return to its
default settings. However, if desired, you can save the
following settings so that they will be remembered even
after the power is off.
Parameter settings that are saved
Retrigger
Velocity
Touch
Portamento Time
Octaver Value
Pedal Assign
MIDI Controller User Edit
Drum User Edit
Auto Off
Transpose
Octave
Program change
MIDI Channel
1.
Press the [SHIFT] footswitch to activate
Shift mode (secondary footswitch func-
tions).
The [SHIFT] indicator lights.
2.
Press the [HOLD/PARAMETER] foot switch.
The [PARAMETER] indicator flashes.
r
Page
24
24
24
24
24
24
25
25
25
19
19
20
21
23