Specifications - Technics SL-1210GAE Manuel D'utilisation

Specifications

General
Power supply AC 120V, 60 Hz
Power 14 W (Power ON)
consumption Approx. 0.2 W (Power OFF)
Dimensions 453 x 173 x 372 mm
27
(W×H×D) (
17-
Approx. 18.0 k g
Mass
(39.7lbs)
Turntable section
Type Direct drive manual
turntable
Drive method Direct drive
Motor Brushless DC motor
Turntable Brass and aluminum diecast
combined
Diameter: 332 mm
(13-
Mass: Approx. 3.6 k g
15
(7-
(including a rubber sheet)
Turntable speeds 33- 1
Variable range ±8 % and ±16 %
pitch
3.3 k g -cm (2.8 lb-in)
Starting torque
Build-up 0.7 s. from standstill to
1
characteristics 33-
Braking system Electronic brake
Wow and flutter 0.025 % W.R.M.S.
(JIS C5521)
Rumble 78 dB (IEC 98A weighted)
13 21
/ " / " /
× 6- × 14-
32 16 32
5
/ ")
64
/ lbs)
16
/ , 45 and 78 rpm
3
/ rpm
3
Tone arm section
Type
Effective length
Overhang
Tracking error
")
angle
Offset angle
Arm-height
adjustment range
Stylus pressure
adjustment range
Head shell weight Approx. 7.6 g
Applicable
cartridge weight
range
Head shell
terminal lug
Specifications are subject to change without
notice.
Static Balance
230 mm (9- 1 / ")
16
15 mm ( 19 / ")
32
Within 2° 32' (at the outer
groove of 30 cm (12")
record)
Within 0° 32' (at the inner
groove of 30 cm (12")
record)
22°
0 – 6 mm (0" - 15 / ")
64
0 – 4 g (direct reading)
(Without the auxiliary weight)
5.6 to 12.0 g
14.3 to 20.7 g (including the
head shell)
(With the small auxiliary weight)
10.0 to 16.4 g
18.7 to 25.1 g (including the
head shell)
(With the big auxiliary weight)
14.3 to 19.8 g
23.0 to 28.5 g (including the
head shell)
ø 1.2 mm 4-pin terminal lug
(25)
English
25