Preparation; Tone Arm Height - Technics SL-1210GAE Manuel D'utilisation

Adjustment
Make this adjustment only if the cartridge you
are using makes it necessary.

Preparation

z Put a record on the turntable.
1
Release the arm lock.
Arm lock
2
Adjust the height with the arm-
height control ring.
Adjust the arm height until the tone arm
becomes parallel to a record.
Use the chart below as reference to find the

appropriate position mark for the height of
your cartridge.
(For supplied head shell)
Cartridge height
(H) in millimeters
k Turn the arm-height
control ring to align the
position mark with the
index line.
15
0 to 6 mm (0" to /
are marked on the arm
height control ring.
18
(18)
English
(continued)

Tone arm height

(Released)
(Locked)
Height control
position
17 0
18 1
19 2
20 3
21 4
22 5
23 6
")
64
Index line
Arm-height control
ring
3
After arm height adjustment is
finished, lock the tone arm by
turning the arm lock knob.
When you don't know the cartridge
„ „
height (H),
Remove the stylus cover, taking care not to
damage the stylus, then release the arm clamp.
Lower the cue lever, rest the stylus on a record
and adjust the height control until the tone arm
and record are parallel.
Parallel to the turntable
Attention
z Be careful not to damage the stylus tip.
z Do not use the product with the arm lock
released.