American Dynamics Illustra 625 PTZ Guide De Référence Rapide page 21

17 Maintain upward pressure and rotate the camera housing clockwise to lock into position
as seen in Figure 15.
Ensure that both bayonet lock pins are fully engaged before removing your hands from the
outdoor camera housing.
The camera housing is now supported.
18 Tighten the two M8 screws highlighted in Figure 3 in the pendant adapter using the HEX
L-Key Tool, to fully secure the outdoor camera housing.
19 Push any excess cable into the EndCap and replace the access cover as seen in Figure
16.
English Illustra 625 PTZ Outdoor Housing
Figure 15
11