BREIL YM52 Mode D'emploi page 12

3. Push back crown "2" all the way in to the normal position.
Then, pull it out again to the first click. The alarm demonstration sound beeps, if crown
"2" is pulled out to the first click within one minute after being pushed back in to the
normal position. Press
* With each press of
They move quickly if
Push back crown "2" in to the normal position.
4.
The alarm hands move to show the current time.
Alarm engagement/disengagement
• T o engage the alarm, pull out cronw "2" to the first click. The alarm hands move to
indicate the designated alarm time set previously .
*
The alarm rings at the designated time for 20 seconds. T o stop it manually , press
, or , or push back crown "2" in to the normal position.
• When crown "2" is at the normal position, the alarm is disengaged, and the alarm
hands indicate the current time.
12
9 3
6
8
repeatedly to set the desired alarm time.
the alarm hands move one minute.
is kept pressed.
[Alarm
engaged]
First click
Crown 2
(0)
(1)
[Alarm
disengaged]
12
9 3
Crown 2
6
(0)
Normal
position