Belkin F5D6130 Manuel De L'utilisateur page 26

CONFIGURING THE WIRELESS NETWORK SETTINGS
1. Click the "Restore Defaults" button.
2. The following message will appear. Click "OK".
3. The following message will appear. Restoring the defaults includes
restarting the AP. It can take up to 60 seconds. It is important not to turn
the power to the AP off during the restart.
4. A 30-second countdown will appear on the screen. When the countdown
reaches zero, the AP's defaults will be restored. The AP home page should
appear automatically. If it does not, type in the AP's address (default =
192.168.2.1) into the navigation bar of your browser.
Saving a Current Configuration
You can save your current configuration by using this feature. Saving your
configuration will allow you to restore it later if your settings are lost or
changed. It is recommended that you back up your current configuration
before performing a firmware update.
23