Krüger & Matz KMPM7 Mode D'emploi page 9

Owner's manual
PAIRING MODE
1. Press and hold MFB on both earphones for about 6 seconds. The earphones will turn on,
connect and automatically enter Bluetooth pairing mode (on the left channel earphone,
LED indicator flashes blue and red alternatively).
2. Enable the Bluetooth function on the external device and search for new Bluetooth devices.
3. Select and connect with this device (KM M7).
4. After successful pairing, the earphones will issue a voice prompt. When the earphones are
paired with an external device, the blue indicators blink alternatively on both earphones.
Notes:
• If pairing is not completed within 2 minutes, the earphones will turn off. In that case, repeat
paring process to pair the earphones with external device.
• Every time the earphones are switched on, they will connect to last connected device
automatically. Please note, your device must be on with Bluetooth function turned on.
CHARGING
1. Place both earphones in the charging station. Make sure to align the charging contacts
correctly on the earphones and the charging station.
2. Connect the USB charging cord to the microUSB charging port of the charging station and
insert the other end into a port in a computer or AC/DC power adapter.
3. When battery is charging, red LED on the charging station is on. When battery is fully
charged, red LED on the charging station is off. When the battery level is low, red LED
flashes.
Notes:
• Please be sure the battery has been charged fully before first use.
• Charge the device regularly to keep its battery in good condition.
• The earphones battery indicator will be displayed when connected to iOS devices.
9