Publicité
Les langues disponibles
Les langues disponibles
Operation
Rotation operation
C
To select rotation operation, slide down the ring for the line function 3 and
press the mode selector switch 4. The laser starts with the highest rota-
tional speed. The rotational speed is adjustable in order to enhance the
visibility of the laser beam. Repeated pressing of the mode selector switch
4 reduces the speed in 3 steps to a standstill.
When working with the receiver 17, the highest rotational speed is recom-
mended.
When working without the receiver 17, the lowest rotational speed or line
operation is recommended.
Point operation
After switching on, the unit emits a laser beam which is split into two
beams at a right-angle at the laser exit.
In the horizontal position, this results in a continuous vertical plumb
beam and a variable horizontal beam which is deflected by 90°.
In the vertical position, a continuous plane beam and a variable vertical
beam are available.
By simply turning the prism cap 1, the variable beam is directed manually
to the desired position.
Point operation is particularly well suited for interior work.
Standard Line
D
To select line operation, slide up the ring for line function 3 and press the
mode selector switch 4. The laser starts with the longest line length which
is adjustable depending on the visibility and working area. Repeated
pressing of the mode selector switch 4 reduces the length L of the line in
3 steps to a standstill.
By simply turning the prism cap 1, the line can be moved manually.
Set the desired line length before measuring.
Working Instructions
Do not point the laser beam at persons or animals.
Working with a Tripod (Accessory)
The construction laser is equipped with 1/4" tripod receptacles 16 for
horizontal and vertical applications. To mount the construction laser on a
tripod 22 with 5/8" threads, use the adapter 23 provided.
For tripods 22 with a millimetre scale on the extension, the height offset
can be set directly.
1 609 929 C25 • (01.07) T
Operation with Wall Mount
F
For work exceeding the extension height of tripods, the
unit can be operated with the wall mount 24. Attach the
wall mount 24 to the wall.
The construction laser is inserted into the wall mount
from above and secured with the locking lever.
English–5
Publicité
