GB
Swivelling the
battery-powered
LED work light
The appliance housing
(11) with LED lamp can be
installed on the base (5) in
6 positions.
Maintenance
The battery-powered LED
work lamp is maintenance-
free
Cleaning
Before cleaning,
disconnect the
charger from the
mains and switch
off the battery-po-
wered LED lamp.
• Clean the battery-
powered LED work lamp
with a soft, dry cloth
to avoid scratching the
cover of the LED lamp.
• Clean the charger and
the battery with a dry
cloth or with a paint
brush. Do not use water
or metal objects.
• Do not use any abra-
sive cleaning agents or
solvents. These could
damage the device irre-
parably.
• Do not use water or
26
metallic aids. There is a
risk of a short circuit.
Storage
Avoid extreme cold or heat
during storage, so that
the battery does not lose
performance.
Before prolonged storage,
remove the battery from
the device and charge it
fully.
Disposal and
protection of the
environment
Remove the battery from
the device and take the
device, battery, acces-
sories and packaging for
environmentally friendly
recycling.
Machines do not be-
long with domestic
waste.
Do not dispose of
batteries in
household waste,
fire (risk of explosi-
on) or water.
Damaged batteries
may damage the
environment and
your health if toxic
fumes or liquids leak
out.