afx light DJ-TRUSS-4 Instructions De Montage page 2

GB
MOUNTING INSTRUCTIONS
SAFETY RECOMMENDATIONS
Read all instructions prior to starting the assembly of the truss system
Unpack all parts and check if they are complete and in good condition.
Don't mount the truss if parts are damaged or distorted.
Hang the light effects only on the main tubes, not on the lattices.
Assemble the system properly by using all parts.
Do not drag the truss system. Ask for somebody to help you.
In order to increase the stability of the truss system, it is recommended to place sandbags on the base plates.
Do not exceed a maximum load of 270 kg (575lbs). The load must be evenly dispatched over the truss.
ASSEMBLY
Place all parts of the truss system on the floor in the shape of an inverted "U".
Place the parts in such a way that the numbers at the end match when you assemble them.
Join the parts together and secure them with quick release pins
Fasten the base plates on the 2 bottom ends.
Bring the assembled truss system carefully in an upright position. You need to be at least 2 persons to lift the truss
system.
©Copyright Lotronic 2014 DJ-TRUSS-4 2