Chauvin Arnoux DTR 8510 Notice De Fonctionnement page 51

„ Set Clock: Allows the setting of Time and Date.
„ Setup Nameplate: Allows selection and editing of Present Nameplate voltages or ratios. Predefined ratios can only be edited
through DataView .
®
„ Select Test Type: Allows the selection of Test Type (VT/PT or CT).
„ Select Test Mode: Allows selection of the Test Mode (Ratio or Continuity/ Ratio in VT/PT Mode).
„ Select Storage Mode: Allows the selection of data storage mode (Automatic or Manual).
„ Select Filter: Allows selection of filter (Fast, Normal, Slow). See § 4.3.6.
„ Erase Memory: Allows deletion of all the stored measurement records
„ Select Language: Allows selection of language on the display (English, French, German, Italian, Spanish, Portuguese)
NOTE: To move one level up and return to Configure Instrument, press the  and  keys simultaneously.
text.
4.3.1. SET CLOCK
1. Within the top level of Configure Instrument, press the  or  key until Set Clock appears on the display, then press ENTER.
Select
Language
Erase Memory
Select
Filter
Set
Clock
Select
Storage Mode
Figure 4-4
Figure 4-5
51
Setup
Nameplate
Select
Test Type
Select
Test Mode
Text text text