Publicité
Les langues disponibles
Les langues disponibles
Thank you for purchasing this SkyTronic soft start inverter. Read this manual carefully and keep it for future
reference.
Warnings
-
Read the manual prior to using the unit.
-
Keep the manual for future reference.
-
Keep the packaging for safer transport in its original packaging
-
Install the unit in such a way that sufficient cooling is ensured.
-
The unit contains voltage carrying parts. DO NOT open the unit.
-
When you unplug the unit from the mains always pull the plug, never the lead.
-
Never plug or unplug the unit with wet hands.
-
If the plug and/or mains lead are damaged, they need to be repaired by a qualified technician.
-
If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a mains
outlet.
-
Repairs have to be carried out by a qualified technician.
-
Do no place the unit near heat sources.
-
When the unit operates, NEVER touch the battery clamps, this may result in electric shock.
-
Do not clean the unit with solvents or detergents. Only use a dry cloth for cleaning.
-
Make sure that no small objects or liquids can enter the housing.
General Features
This range of inverters from SkyTronic transforms a 12 VDC battery voltage into a 230 VAC mains voltage.
Thus enabling you to use your domestic equipment everywhere you want to use it. It can be used on boats,
caravans, campers, cars etc. The regulated output voltage makes the inverters suitable for use with sensitive
devices such as A/V equipment & computers. The inverters are actually good enough for any kind of
equipment you want to connect.
Operation
Connect this inverter to a battery (red is the "+" lead, black is the "-" lead). Make sure that all connections are
made correctly and the clamps are firmly connected to the battery. Now switch the inverter on and after that,
connect the appliance you want to use and switch the appliance on. Switch off in reverse order.
Protection
All SkyTronic inverters are protected against thermal overload, peak currents and short circuit. This ensures
the unit won't be damaged when something happens. The unit will switch off automatically to protect the
internal parts.
To prevent switching off, always check if the cooling fan isn't obstructed, if there is sufficient airflow around
the unit and if it's connected to the right DC input voltage.
Fuse replacement
ALWAYS disconnect this unit from its power supply before attempting to replace the fuse. Remove the old
fuse from the holder and replace with a fuse with the exact same power rating. Replacement with anything
other than the exact same fuse might cause damage to this unit.
UK
Publicité
