Atag NEOZ 3319471 Manuel D'installation page 11

• Domestic Hot Water settings
Allows you to select the desired temperature,
the operating mode for hot water production
and the thermal sanitisation function of a
DHW tank (if present).
• Impostazioni Fireplace
When the function is activated, it regulates
the request for heat in the zone associated
with the device based on the external tem-
perature until the selected time. When the
function is active, the indoor temperature
of the room does not affect the request for
heat.
In order to enable the function, there needs
to be an external temperature probe in the
system or, if available, the internet weather
report needs to be active (see Connectivity
menu).
• Connectivity
Allows you to enter the settings of the remote
connection service when a WiFi device
is connected to the bus and allows you to
consult the main diagnostics information.
• System Information
Allows you to consult the main diagnostics
information (of the connected devices), and
the energy efficiency performance of the
system.
• Screen Settings
Allows you to configure the main display set-
tings.
•
Advanced Settings
Allows you to access the following functions:
- Heating Temperature Regulation
- Cooling Temperature Regulation
- Buffer Settings
- Advanced settings of the connected de-
vices (boiler, heat pump, hybrid...)
- Units of Measurement
- Photovoltaic integration
- Setting the units of measurement
- Measured temperature correction
- Selecting the zones to be displayed in the
"Zone" menu
EN / 11