Oase IR Control Set Mode D'emploi Et Garantie page 16

- EN -
Intended use
IR Control Set, referred to as "unit", may only be used
as specified in the following:
• To control HighLine Premium LED.
• Operate
in accordance
(→ Technical data)
• Only operate with EAC Transformer.
• Only use indoors and for aquaristic purposes in the
home (not for commercial use).
Accessories
• HighLine Premium LED (33882, 33893, 33894,
33895, 33896) LED light.
• EAC Transformer (33888) for power supply.
• Power Adapter (33898) for use of an additional
EAC Transformer.
• EAC Y-Adapter (33897) for connection of additional
HighLine Premium LED.
CONNECTION
N O T E
Never connect or disconnect the plugs and sockets of
the connection cables when they are under load! This
could damage the contacts.
• First isolate the unit (switch off and disconnect
from the power supply), then start work on the
unit.
16
with instructions.
Max. six HighLine Premium LED may be connected to
the IR Control Set. The EAC Transformer is required for
power supply.
• Do not exceed the max. connected load of the EAC
Transformer.
• The connected load is the total power consump-
tion of the connected HighLine Premium LED.
 B
4. Operation of a HighLine Premium LED.
5. Operation with two HighLine Premium LED, whose
total load does not exceed 120 W.
 C
1. Operation with more than two HighLine Premium
LED, whose total load does not exceed 120 W.
–
An additional HighLine Premium LED is con-
nected for each additional Y adapter.
2. Operation with more than two HighLine Premium
LED, whose total load exceeds 120 W.
– An additional EAC Transformer is integrated via
the Power Adapter.
IR Control Set