Télécharger Imprimer la page

UNITEC Climate W177 Manuel De L'utilisateur page 11

Publicité

Les langues disponibles

Les langues disponibles

IN/OUT COMFORT LEVEL
In/Out Comfort indicator (H) combines the effect of
temperature & humidity and displays in 3 levels:
COMF: Comfortable level, ideal range for both
temperature & humidity
WET:
Contain excess moisture
DRY:
Contain inadequate moisture
ANIMATED COLOR GRAPHS
The circular color graphs (I) are designed as an intuitive
way to gauge the weather at a glance.
The left color graph represents the respective In/Out
temperature, heat index or dew point of the current
display mode. The right graph represents the respecti-
ve In/Out humidity.
The higher the temperature & humidity, the more color
portion of the color graph appears. Lower temperature
& humidity show less color portion of the color graph.
MAXIMUM / MINIMUM MEMORY
Press „MEMORY" 6 button repeatedly to view the
maximum & minimum values of temperature, humidity,
heat index or dew point readings. To clear the memory
record, hold „MEMORY" 6 button while the respecti-
ve values are displaying on screen.
TEMPERATURE & HUMIDITY TREND INDICATOR
The icons will indicate Rising, Steady, Falling if the
temperature or humidity change is more than 1 degree
C (or 2 degree F) within an hour.
CLOCK & CALENDAR
Press „CLOCK" 1 to toggle display between time,
calendar and day of the week.
Hold „CLOCK" 1 button to enter clock setting mode.
Using „" 3 or „" 4 to adjust and „CLOCK" 1 to
conirm, the following values can be set in sequence:
12/24hr format > Hr > Min > Yr > D/M or M/D format >
Month > Date > EXIT
HOME TIME, WORLD (ZONE) TIME
Hold „ZONE"  to enter world (zone) time setting
mode. Press „" 3 or „" 4 to enter the desired
hour offset value from –12 to +12 hours (Switzerland
1). Press „ZONE"  to conirm each setting.
Press „ZONE"  button to toggle between home
(radio-controlled) time and world (zone) time. „ZONE"
icon appears when world (zone) time is selected. When
zone time is not used, set zone time to „0".
313503_Manual_121120.indd 11
ALARM SETTING
Press „ALARM" 2 to show alarm time and „AL." icon
will appear. Press again to enable or disable the alarm.
Bell icon „ " appears when alarm is enabled.
Hold „ALARM" 2 to enter alarm time setting mode.
Press „" 3 or „" 4 to enter the desired Hr/ Min
values and press „ALARM" 2 to conirm setting.
SNOOZE & BACKLIGHT
When alarm is going off, press „SNOOZE/ LIGHT" 9
to trigger snooze alarm and „Zz" icon will appear.
To stop alarm for one day, press „ALARM" key.
Press „SNOOZE/LIGHT" 9 for an extended backlight if
adapter is not connected.
DISPLAY BRIGHTNESS CONTROL
Select display brightness mode with the slide switch 
on the back casing.
- AUTO:
Display brightness is adjusted automatically according
to the surrounding brightness detected by the light
sensor  located on the left of the „SNOOZE/LIGHT"
9 button. In a bright environment, display brightness
will increase. As the environment turns dark, display
brightness will reduce.
(Note: Auto mode is recommended for power saving,
display lifetime and convenient purpose)
(Important: Avoid having obstacle above the light
sensor window for an accurate light sensing result.
Otherwise the display will turn dim even in bright
environment)
- High:
Turn to high brightness mode
- Low:
Turn to low brightness mode
- Off
Turn off display backlight
LOW BATTERY INDICATION
Low battery indication is available for the home unit
itself and all of the 3 remote channels. Replace the bat-
teries and follow the setup procedure in this instruction
manual.
BATTERY DISPOSAL
Replace only with the same or equivalent type recom-
mended by the manufacturer. Please disposal of old,
defective batteries in an environmentally friendly man-
ner in accordance with the relevant legislation.
11
English
20.12.12 09:49

Publicité

loading

Ce manuel est également adapté pour:

313503