Dometic SPK 150 Instructions De Montage page 3

SPK
The following instructions must be observed during the installation of the
cable set. Only a specialized technician can install the cable set when
assembling accessories on a truck.
Intended use
The spiral cable is required to connect the camera and monitor when installing the
RVS reversing video system, with a manufacture date as of January 2010, in a truck
with tractor and semi-trailer/trailer:
•
9600000209 SPK150 is compatible with RV-500SPK
•
9600000220 SPK160 is compatible with RV-100SPK
•
9600000235 SPK170 is compatible with CAM44 and CAM604
•
9600005573 SPK180-V is compatible with the original camera from Volvo
The cable set has been designed for the requirements of commercial use. The instal-
lation sockets are supplied ready for connection and enable easy final mounting on
the vehicle.
Safety and installation instructions
This documentation contains mounting instructions. The manufacturer will not
accept any warranty for damages resulting from incorrect installation.
When installing the spiral cable, note the following:
•
Use the drilling template supplied to mark the mounting position of the sockets
(fig. 1, page 2).
•
Always install the DIN plug connection with the socket contacts towards the
camera, i.e. on the semi-trailer/trailer.
•
Choose the installation position for the socket so that the required cable length
does not exceed the total length of the connection cable. Please note that the
required cable length will change when driving along curves or jackknifing the
trailer.
Scope of delivery
Description
Sockets for towing vehicles
Sockets for semi-trailers/trailers
7-pin spiral cable
EN
SPK150 SPK160
9102200065 9102200087
9102200064 9102200086
9102200204 9102200204
SPK170 SPK180-V
9102200172 9600005598
9102200173 9600005598
9102200204 9102200204
3