Isotronic 90801 Mode D'emploi page 6

Dear Client,
Congratulations for choosing one of our quality products. Please follow these instructions carefully and keep them with you.
1. Product description
With this product you hold a vermin expeller of the new generation in your hands. With the high-class electronics we achieved for the first
time to expel with one single device a large number of inconvenient vermins – without application of chemical substances. Design and
effectiveness are state-of-the-art. In order to avoid damages by improper application please observe the instruction for use and keep it well.
2. Putting into operation
After connecting the device to the socket an ultra high sound is emitted in the frequency set by you. This sound can possibly be hearable as
by nature some persons hear certain frequencies more or less well. For ensuring the function the device is provided with a red light emitting
diode which flashes in proper operation.
3. Operation
1. Set selection of frequency according to application mode by means of selector switch on the device:
Switch position A: approx. 7.000 Hz – expels mosquitoes and flees
Switch position B: approx. 10.000 Hz – expels mice, rats and houseflies
Switch position C: approx. 12.000 Hz – expels martens and cockroaches
2. Position the device in a socket in such manner that the sound radiation can take place unhampered in the complete room and is not
impeded by curtains, blankets or furniture. Behind the device a dead angle is always formed where no effectiveness is achieved.
3. Furthermore it can happen (esp. abroad) that individual vermin are not expelled as they do not belong to the genus which mainly can be
found in our region.
4. The durability of the device is at continuous operation (24 Std.) approx. five years. Then the installed piezo-disc is spent and the frequency
can no longer be kept constantly at a level.
4. Sphere of action
Important: The ultra high sound comes directly from the device. Because of that, do not place the device behind curtains or furniture. The
indicated sphere of action depends on the corresponding place of installation and refers to a height of the room of 2.40 m. The
more furniture is placed in the room the less the ultra high sound can cover the complete are.
5. Technical data
Operating voltage: 230 V~, 50 Hz
Protection class: II
Protection type: covered
Power input: approx. 1 Watt
Sphere of action: approx. 40 m²
Function control: LED
6. Safety instructions
Important: Damage caused by not adhering to the operating instructions is not covered by guarantee. ISOTRONIC accepts no liability
whatsoever for any resulting consequent damages.
- Only operate the device at its intended voltage.
- In case of repairs, only use original spare parts, to avoid serious damage.
- Repairs or other works, e.g. changing a fuse, etc. may only be carried out by an appropriately trained, skilled person.
- It must be noted that operator or connecting errors lie outside the influence of ISOTRONIC and we cannot accept any liability for
resulting damages.
- Always check whether the device is suitable for the respective place where you intend using it.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance
7. General information
1. Electric appliances, packaging material etc. should be kept away from children.
2. Dispose packaging and worn out material correctly and in an environmentally friendly way.
3. Do only pass on the device including the operation manual.
4. Subject to change of design and technical data without notice for the sake of constant product improvement.
8. Guarantee
We grant a two year guarantee for this device. Guarantee includes repair of all defects that were not caused by defective material or
fabrication mistakes. Guarantee does not apply on wearing parts. Since ISOTRONIC has no influence on correct and appropriate
assemblage and operation it is obvious that guarantee applies only on completeness and proper condition. ISOTRONIC takes on neither
liability nor guarantee for damages or consequential damages in connection with this product. This applies especially when the device was
altered or repaired, when circuits were changed or non-original spare parts were used or when damage was caused by false or negligent
operation or abuse.
Your
ISOTRONIC-Team
Instructions for Use
Vario Protection
Article No. 90801 / 90807
For indoor use only!
D- 72160 Horb
Status: 02/09