Cleaning Filter; Changing Collector Bag; Trouble Shooting; Available Accessories - Jet DC-950A Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Inspect the proper function of the dust
collection system daily.
Clean the unit regularly.
Defective safety devices must be
replaced immediately.
Repair and maintenance work on the
electrical system may only be carried
out by a qualified electrician.
7.1 Cleaning Filter Bag
When the air flow reduces the filter
bag must be cleaned.
Unhook the filter bag from the support
rod and shake the bag
ATTENTION:
During the changing or cleaning of the
filters it's necessary to use a mask
(mask with filtration).

7.2 Changing collector bag

Always disconnect the dust collector
from the power source (unplug) before
servicing or changing filters.
During the changing or cleaning of the
collector bag it's necessary to use a
mask (mask with filtration).
Shake the filter bag.
Wait to allow dust to set.
Remove the collector bag by pushing
the snap ring (E, Fig 7) of the collector
bag upwards at an angle and pulling
the bag and snap ring out.

8. Trouble shooting

Unit doesn't start
*No electricity-
check mains and fuse.
*Defective switch, motor or cord-
consult an electrician.
Air flow too weak
*Clogged filter-
Clean filter.

9. Available accessories

Stock number 10000315
PVC-hose transparent, Ø100mm,
length 2,5m
Stock number 10000312
PVC-hose transparent, Ø100mm,
length 5m
Stock number JW1022
Hose clamp Ø100mm
Stock number 709565
Collection bags (set of 5)
Stock number 10000339
Automatic start unit 230V
Stock number 708737
2-Micron canister filter
Further dust collection accessories
available, see JET price list.

10. Environmental protection

Protect the environment.
Your appliance contains valuable
materials which can be recovered or
recycled. Please leave it at a
specialized institution.
6

Publicité

Chapitres

Table des Matières
loading

Table des Matières