Exhaust Arm Installation; Picture 3, Unpacking And Installing Wheels - Kemper ProfiMaster IFA Mode D'emploi

Pos. Designation
3 Service door
4 Filter set
4.1 Plug-in prefilter module
4.2 Main filter
5 Grip handle
6 Castor wheel with brake (front wheel)
7 Rear wheel

5.2 Exhaust arm installation

The exhaust arm consists of three main parts - the swivel ring, supporting structure
and exhaust nozzle. These parts are individually packaged in cardboard boxes.
The cardboard box with the supporting structure includes instructions for the
installation and adjustment of the exhaust arm. When installing the extraction arm on
a mobile device, follow these instructions.
Product number: 150 2464
Technical changes and errors reserved.
KEMPER ProfiMaster Instruction Manual - EN

Picture 3, Unpacking and Installing Wheels

- 54 -
Quantity
1
1
1
1
1
2
2
rev.: 2
Status as of: 05/2015