Assembly Of Exhaust Arm; Mounting The Discharge Housing - Kemper Filter Master XL Mode D'emploi

KEMPER Filter-Master XL Operating Instructions - EN

5.1 Assembly of exhaust arm

The exhaust arm consists of three main components: slew ring, support frame and
extraction hood. These are individually packaged in one carton each.
There is a separate guide for installing and adjusting the exhaust arm in the box
containing the support frame. Follow the instructions for the installation
of the extraction arm on a mobile device.

5.2 Mounting the discharge housing

Mount the discharge housing on the discharge opening of the device.
This is located on the rear of the device. Please note that the discharge opening
of the housing should face upwards.
Figure 3, mounting the discharge housing
- 62 –
Technical changes and errors excepted.