Using Instantaneous Switching; Using Programmes - Bosch VitaPower 4 Série Notice D'utilisation

en Basic operation
WARNING
Risk of scalding!
Hot food may splash out during pro-
cessing and steam can escape from
the lid.
Add a maximum of 750 ml of hot
▶
or frothing food.
Process hot food carefully.
▶
Do not lean over the appliance.
▶
Prepare the food.
1.
For example, cut up large items of
food.
Turn the blender jug upside down.
2.
Open the retaining bracket.
3.
→ Fig.
3
Align the EasyClick blade insert
4.
with the tap in the blender jug.
Push the EasyClick blade insert
5.
into the blender jug and close the
retaining bracket until it clicks into
place.
→ Fig.
3
Place the blender jug onto the
6.
base unit and rotate in a clockwise
direction until it locks into place.
→ Fig.
4
Add the food to the blender jug.
7.
→ Fig.
5
Observe the minimum and max-
imum processing quantities.
→ "Overview of recipes", Page 40
Insert the measuring jug in the lid
8.
and place the lid on the blender
jug.
→ Fig.
6
The and
match up.
Turn the lid in the direction
9.
it clicks into place.
→ Fig.
7
The lid must be completely closed.
a The colour of the lock indicator for
the lid changes from red to green.
Insert the mains plug.
10.
36
markings must
Set the rotary switch to ⁠ .
11.
→ Fig.
a The status display (LED) on the
rotary switch lights up.
Set the rotary switch to the recom-
12.
mended speed.
→ Fig.
Process the ingredients until you
13.
achieve the required result.
To end the operation, set the rotary
14.
switch to ⁠ .
Using instantaneous switch-
ing
Set the rotary switch to
1.
hold it there.
→ Fig.
a The ingredients are processed at
maximum speed.
Release the rotary switch.
2.
a The rotary switch jumps to ⁠ .
a Processing stops.

Using programmes

Requirements
¡ The blade insert is installed.
¡ The blender jug has been attached
and locked.
¡ The blender jug is filled with the
food or ice cubes.
¡ The lid is attached and locked.
¡ The rotary switch is set to ⁠ .
Set the rotary switch to ⁠ .
1.
→ Fig.
a The status display (LED) on the
rotary switch lights up.
Press the
2.
until
programme button.
→ Fig.
a While the programme is running,
the LED for the selected pro-
gramme lights up and the status
display (LED) goes out.
Wait until the appliance stops.
3.
8
9
10
8
or
11
and