SXT Scooters BUDDY Manuel Utilisateur page 56

E
SPEED MODE
When power is on
The default display is
You may change it using the
Speed mode : this function is to limit the maximum
speed of the scooter, either for a beginner user or for
more accurate riding in a crowded surrounding:
•
Speed mode 3 - using full throttle will gain maximum
speed of the scooter, 25KM/H at default.
•
Speed mode 2 - using full throttle, will gain 70% of scooter top speed.
•
Speed mode 1 - using full throttle, the maximum speed will be under10 KM/H
SETTINGS - DISPLAY MODES
To enter the display modes settings :
Touch
Press
Long press
•
LCD BACKLIGHT (FIRST MODE)
When power is on, you can open or close the LCD backlight by long press
There are 3 levels for different LCD brightness.
Press to change level from 1 to 3 (low/middle/high).
Long touch
Short touch
•
SPEED LIMIT MODE (second mode)
Default and highest speed 25KM/H at full throttle.
You can define other speed limits (from 6KM/H to 30KM/H).
Press or
Long touch
Short touch
THROTTLE OPERATION
SPEED
mode (appear at top right).
buttons together for 2 seconds will enter in the first mode.
to switch between modes
will back to main function menu.
to save settings.
to enter second mode.
buttons to change speed limit number.
to save setting.
to enter third mode.
buttons.
2 0