Publicité
4. Press the Start button to turn the machine on (Figure 4-6). This will bing
up the RUN screen.
5. Use the arrow buttons to highlight ZERO COUNT, then press the Enter
button to reset the count (Figure 4-7).
38
OMATION® Series 410 Envelopener™ Operator Manual
Figure 4-6: Start Button
1
Use the arrows to navigate to ZERO COUNT...
Figure 4-7: Resetting the counter
OPEX Corporation
Press the Start
Button to turn on
the machine...
...and access the
"RUN" screen
2
...then press
Enter to reset.
Operation
Publicité
Chapitres
