Cleaning And Maintaining The Antenna Module; Specifications Adn-W Am - Sennheiser ADN-W AM Notice D'emploi

Cleaning and maintaining the antenna module

Cleaning and maintaining the
antenna module

Specifications ADN-W AM

RF frequency range
RF output power
Power supply
Power consumption
Antennas
Transmission range
Mounting thread
Temperature range
Relative humidity
Dimensions (W x H x D)
Weight
one wireless conference system is in use and if the default
eavesdropping protection is sufficient.
– Closed access mode
"Closed")
Only wireless conference units whose serial numbers are listed in
a participant list can be used in the wireless conference. If several
wireless conferences are held simultaneously, the closed access
mode ensures that the wireless conference units connect to the
correct conference system. This access mode increases the pro-
tection against eavesdropping because only selected and
enabled wireless conference units can be used.
Further information on how to configure the wireless confer-
ence components can be found in the ADN system manual.
Only use a dry and soft cloth to clean the product.
2.4 GHz; 5.1 to 5.9 GHz (see page 13)
25 to 100 mW (depending on the selected
country/region, see page 13)
12 to 15 V
alternatively via ADN
6 W
3 rod antennas with R-SMA connection
typ. 30 m
5/8" and 3/8" thread insert
operation: +5°C to +45°C
storage: -25°C to +70°C
operation: 20 to 95%
storage: 10 to 90%
approx. 226 x 181 x 58 mm
approx. 1,660 g
("Wireless Menu" > "Access
PORT bus 52.8 V
ADN-W
Mode" >
AMcc|cc13