Switching The Antenna Module On/Off - Sennheiser ADN-W AM Notice D'emploi

Switching the antenna module on/off

Switching the antenna module on/off
The antenna module is connected to the ADN CU1 central unit and
automatically switches on when the central unit is switched on.
To switch the antenna module on:
To switch the antenna module off:
Or:
PORT I/PORT II
IN
...
20
OUT
1
Set the on/off switch of the ADN CU1 central unit to position "I".
The central unit switches on and its display panel lights up. The
connected ADN-W AM antenna module is also switched on.
ADN CU1
ADN CU1
ESC
ON
1
Disconnect the system cable from the input socket
antenna module.
1
Set the on/off switch of the ADN CU1 central unit to position "0".
The antenna module is switched off. The wireless conference units
try to reconnect to the antenna module and automatically switch
off after 5 minutes if no switched-on antenna module can be
found.
PORT I/PORT II PORT I/PORT II
1 2 1 2
IN
...
20
OUT
ADN-W AM
ON
ADN-W
1 2
OUT
...
20
IN
4
of the
AMcc|cc11