Preparing The Antenna Module For Operation; Connecting The Antennas - Sennheiser ADN-W AM Notice D'emploi

Preparing the antenna module for operation

Preparing the antenna module for operation

Connecting the antennas

Always use all 3 antennas to ensure reliable wireless operation. The
3 antennas are connected upon delivery.
CAUTION
Radio communication outside the legal requirements!
When connecting antennas other than the supplied ones, the trans-
mission power of the conference system may not meet the legal
requirements and may cause interference to other radio equipment.
Only connect the supplied rod antennas to the antenna module.
Connect the 3 antennas
Screw down the 3 antenna coupling rings
The antennas are connected and secured.
7
6
6
to the 3 antenna sockets.
7
as shown.
ADN-W AMcc|cc5