Bertos PD Mode D'emploi page 12

12 |
- To start the grill, turn the knob clockwise to the required
setting (0 = OFF).
- Two indicator lights illuminate when the appliance
is switched on: 1 indicates that the appliance is
connected to the power supply, 2 indicates activation
of resistances; this light switches off to indicate that the
set temperature has been reached. The lamp switches
on and off intermittently during normal operations.
WARNING: NEvER USE WATER JETS TO CLEAN THE
APPLIANCE.
IMPORTANT
- Disconnect the appliance from the power supply before
cleaning or performing maintenance.
Carry out a thorough cleaning of the appliance regularly,
taking into account the following:
EN
clean stainless steel parts with suitable non-abrasive
products available commercially. Never use substances
containing chlorine (bleach etc.);
clean painted and chrome-finished parts with a cloth
and soap and water, or water and a non-corrosive liquid
detergent. Do not use scouring pads or detergents
containing abrasive substances;
grill plates can be cleaned with steel wire brushes.
WARRANTY CERTIFICATE
COMPANY NAME:
ADDRESS:
____________________________________________________________________________________________________
POSTAL CODE :
__________
PROVINCE:
_______________
ATTENTION!
The manufacturer declines all responsibility for any inaccuracies in this handbook due to typing or printing errors.
The manufacturer reserves the right to make any changes that may be required without altering the basic features of the
product. The manufacturer declines all responsibility in the event that the instructions given in this handbook are not fully
observed. The manufacturer declines all responsibility for any direct or indirect damage caused by incorrect installation,
tampering, poor maintenance and negligent use.
CLEANING
____________________________________________________________________________________________
TOWN:
___________________________________________________________________________
INSTALLATION DATE:
MODEL.
_________________________________________
PART NUMBER:
IMPORTANT
- In the event of appliance operation problems, contact
qualified personnel for maintenance operations.
MAINTENANCE
IMPORTANT
- disconnect the appliance from the power supply before
carrying out any maintenance. No special maintenance
is required: simply check the condition of the cables,
controls and electrical resistances. Parts requiring
replacement are easily accessible from the base of the
appliance. Use original spare parts only.
MAINTENANCE OPERATIONS MUST BE CARRIED OUT
EXCLUSIVELY BY QUALIFIED PERSONNEL.
The manufacturer declines all responsibility for possible
inaccuracies in the present manual caused by transcription
or printing errors. The manufacturer also reserves the right
to carry out modifications when deemed necessary without
altering the basic characteristics of the product.
____________________________________________________________
________________________________