Sendoline S1-E Notice D'utilisation page 47

Instructions for use
6567460 D3643.201.01.03.02
Steam sterilizers that meet the requirements of EN 13060, class B
or S, and are also suitable for the sterilization of straight/contra-
angle handpieces are approved.
NOTE! Do not exceed 140 °C (284 °F), even during the drying
phase.
After sterilizing
1. Remove the instrument from the steam sterilizer immediately.
CAUTION! The instrument is hot. Risk of burns!
NOTE! Do not attempt to accelerate the cooling process by
immersing the instrument in cold water. This can damage your
instrument.
2. Store all instruments so that they are protected from
contamination.
3. Sterilize again once the storage period has elapsed.
7 Reprocessing
45