Connecting The Instrument To An Endometer - Sendoline S1-E Notice D'utilisation

5 Operation
26
5.4

Connecting the instrument to an endometer

The S1-E / S1-A makes it possible to connect a measuring cable for
an endometer by means of a clip in order to check the exact
position of the file in the root canal.
NOTE! Use only endometers, which are approved in the respective
country.
1. Please observe the operating instructions pertaining to the
endometer being used.
2.
Attach an Apex clip [→ 25].
3. Connect the measuring cable of the endometer to the clip's
contact pin.
4. Perform the measurement in accordance with the equipment
manufacturer's specifications.
Based on in vitro studies, we recommend defining the maximum
preparation depth at the coronal end of the apex interval on the
display of the endometer used.
Instructions for use
6567460 D3643.201.01.03.02