Festool DWC 18-2500 Notice D'utilisation D'origine page 15

Take the magazine attachment out of the dry­
wall screwdriver.
12
Removing the carriage
► Push the depth stop [13-3] in to the housing
as far as it will go, until the locking but­
ton [13-1] is level with the marking for car­
riage removal [13-2] – see figure [13].
13
13-3
► Press the locking button [13-1] and at the
same time pull the carriage out of the mag­
azine – see figure [14].
14
► Push the button [15-1] and at the same
time unscrew the depth stop – see fig­
ure [15].
15
13-1
13-2
15-1
Removing the transport lever
► Push the button [16-1] and at the same
time slide in the direction of the arrow – see
figure [16].
16
► Remove the released button [17-1] (figure )
together with the transport lever [17-3] and
the spring [17-2] from the carriage (fig­
ure [17]).
17
17-3
► Clean the individual parts, replace faulty or
worn parts and then reassemble in reverse
order.
When reassembling the transport lever in
the carriage, ensure the spring [17-2] is posi­
tioned correctly within the transport lever. In­
correct assembly can prevent the collated
screws from being transported properly.
English
16-1
17-2
17-1
15