Publicité
Les langues disponibles
Les langues disponibles
en Troubleshooting
Troubleshooting
9 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting our after-sales service. This will avoid unne-
cessary costs.
Fault
Processed food does
not fall into the bowl.
Cutting disc does not
rotate although the
base unit is running.
22
Cause and troubleshooting
Outlet opening or housing is blocked.
Finish processing and unplug from the mains.
1.
Remove the accessory.
2.
Take the accessory apart and remove the block-
3.
age.
Lid is not fitted and engaged properly.
Check whether the lid is fitted properly.
▶
→ "Assembling the continuous feed shredder",
Page 19
Accessory has been overloaded and the disc holder
shaft has broken at the predetermined breaking point.
You can order a new disc holder from customer
▶
service under order number 00630760.
Publicité
