Max HS130 Manuel D'utilisation Et D'entretien page 12

DRIVING FASTENERS
SINGLE FIRE OPERATION
(SEQUENTIAL TRIP)
For single fire operation, depress the contact
arm against the work surface and pull the trigger.
Tool can not fire a second fastener until the trig-
ger is released and tool can cycle.
2
1
PROCEDURE
1 Depress the contact arm.
2 Pull the trigger.
TRIGGER LOCK MECHANISM
Trigger lock dial
The tool is equipped with a trigger lock mecha-
nism. Push and rotate the trigger LOCK to the
trigger UNLOCK position before driving nails.
Trigger
12
DRIVING FASTENERS
When using the tool with both hands;
Hold the rear of the magazine to use.
WARNING
Do not hold the front of the magazine because
your hand may be injured by nails.