König DVB-S2 REC11 Manuel De L'utilisateur page 4

Menu
Main menu Submenu
• "TV Channel List"
"Edit Channel" • "Radio Channel List"
• "Delete channels by satellite"
• "Antenna Connection"
• "Satellite List"
• "Antenna Setup"
"Installation"
• "Single Satellite Search"
• "Multi-Satellite Search"
• "TP List"
• "Language"
• "TV System"
• "Display Setting"
• "Local Time Setting"
"System Setup" • "Timer Setting"
• "Parental Lock"
• "OSD Setting"
• "Favorite"
• "Other"
• "Information"
• "Factory Setting"
• "Upgrade by USB"
• "Network Local Setting"
"Tools"
• "WiFi Manager"
• "Upgrade by Network"
• "Weather Forecast"
• "RSS Reader"
• "Othello"
"Games"
• "Sudoku"
• "Media Player"
• "PVR Storage Information"
"REC"
• "PVR Setting"
• "Remove USB device safely"
"Single Satellite Search"
Submenu Action
1. Select the satellite.
"Satellite"
2. Press the OK button.
1. Select "Yes" or "No".
"FTA Only"
2. Press the OK button.
1. Select "TV + Radio", "TV Channel" or
"Scan Channel" "Radio".
2. Press the OK button.
1. Select "Yes" or "No".
2. Press the OK button.
"Network Search"
Note: The menu item becomes grey when "Auto
Scan" is selected in the "Scan Mode" submenu.
1. Select "Auto Scan" or "Preset Scan".
2. Press the OK button.
"Scan Mode"
Note: "Auto Scan" is a blind scan, while "Preset Scan"
searches for preset frequencies.
"Search" • Press the OK button to start searching.
"Factory Setting"
• Select "Yes" to return to the factory settings.
All searched channels and set information will
be deleted.
• Select "No" to cancel.
"Upgrade by USB"
Submenu
"Upgrade Mode"
"Upgrade File"
"Start"
Cleaning and maintenance
Warning!
• Before cleaning or maintenance, switch off the
device, remove the mains plug from the wall
socket and wait until the device has cooled
down.
• Do not use cleaning solvents or abrasives.
• Do not clean the inside of the device.
• Do not attempt to repair the device. If the
device does not operate correctly, replace it
with a new device.
• Clean the outside of the device using a soft,
damp cloth. Thoroughly dry the outside of the
device with a clean, dry cloth.
5 5
English
Action
1. Select "allcode", "maincode", "userdb",
"defaultdb" or "Dump".
When changing the upgrade mode, "Upgrade File"
will show the corresponding file as follows:
Upgrade mode File format
allcode *.abs
maincode *.abs
userdb *.abs
defaultdb *.abs
Note: The menu item becomes grey when the USB
device is not connected.
1. Select the upgrade file.
2. Press the OK button.
1. Start upgrading by USB.