König DVB-S2 REC11 Manuel De L'utilisateur page 2

DVB-S2 REC11
Digital satellite receiver
Package contents
• Digital satellite receiver
• Remote control (incl. AAA battery)
Description
The digital satellite receiver is a device intended for
the reception of digital satellite programmes using a
satellite antenna.
Front panel
2 4 3 1
1. Display
2. On/standby button
3. Up button
4. Down button
• Press the button to switch
on the device.
• Press the button again to
set the device to standby
mode.
• Press the button to go to
the next channel.
• Press the button to move to
a higher item in the menu.
• Press the button to go to
the previous channel.
• Press the button to move to
a lower item in the menu.
3 3
Rear panel
LNB IN
13/18V USB
400mA max. (5V --- )
7 8 9
5. On/off switch
6. Mains cable
7. Satellite antenna input
8. USB input
9. HDMI output
10. SCART output
English
100-240V~
50/60Hz
MAX. 25W
HDMI
TV OFF ON
10 5 6
• To switch on the device, set
the on/off switch to the "I"
position.
• To switch off the device, set
the on/off switch to the "O"
position.
• Connect the mains cable to
the mains.
• Connect a satellite antenna
to the satellite antenna
input using an antenna
cable.
• Connect a USB device to
the USB input using an USB
cable.
• Connect a TV to the HDMI
output using an HDMI
cable.
• Connect a TV to the SCART
output using a SCART cable.