ALPATEC ACS 150 ET Mode D'emploi page 17

notice_ACS 150 ET:notice_AC 10 FT
If there is more than 1.6meters high between the two units,
moistures have to be removed using the drainage knob:
- Remove the drainage knob at the back of the product
- connect a Ø15/17 pipe to this hole
- make sure the water flow away correctly
Before any cleaning operation, stop and unplug the product.
Do not use chemical solvent.
Use a dry and wet cloth to clean the outside of the units.
ANTI DUST AIR FILTER
The filter is located at the back of the product.
Remove and clean it using a vacuum cleaner or a damp cloth and dry it before replacing.
If the filter is dirty, the air conditioner will be less performing.
Clean the filter at least every two months.
26/02/08 12:03 Page 17
CLEANING
17