ALPATEC ACS 150 ET Mode D'emploi page 14

notice_ACS 150 ET:notice_AC 10 FT 26/02/08 12:03 Page 14
CONTROL PANEL AND FUNCTION DESCRIPTION
4
2
1
3
8 7
5
6
1. M/A: press to turn unit on or off..
2. MODE: press to change the mode (cooling / dehumidifying / fan only).
3. ▼ press to raise the desired temperature (1°C / each pressure).
4. ▲ press to lower the desired temperature (1°C / each pressure).
5. LED screen: show the ambiant temperature in cooling mode and "dh" in dehumidifying mode.
6. VITESSE (speed): press to change the fan speed (auto / high / medium / low).
If auto is selected, the speed will be adapted according to the difference between ambient temperature
and desired temperature. If it is more than 3°C, it turns to high, if it is less than 3°C, it turns to medium
and if it is 0 it turns to slow.
7. MINUTEUR (timer):
Start: press this touch once the product is stop and select the desired time (from 1 to 24 hours). Once the
time is over, the product starts.
Stop: press this touch once the product is on and select the desired time (from 1 to 24 hours). Once the
time is over, the product stops.
8. NUIT (night): when setting this function, please set the timer too.
This function raise the desired temperature 0,5°C each half hour during 2 hours maximum in order to
ensure sleep comfort.
Note: this function is only available with the cooling mode.
14