Designated Use; Instructions; Cleaning And Maintenance Of Materials In Contact With Food; Installing The Appliance - Fulgor Milano F7BC24 1 Série Manuel D'installation, Utilisation Et Entretien

EN
N.B.:
Use original or manufacturer recommended
accessories and spare parts only.

Designated use

This appliance is designed and made to prepare
coffee and heat drinks.
All other use is considered improper.
This appliance is not suitable for commercial use.
The manufacturer is not liable for damage deriving
from improper use of the appliance. This appliance
can be installed over a built-in oven if the latter
is fitted with a cooling fan at the rear (maximum
microwave power: 3 kW).

Instructions

Read these instructions carefully before using the
appliance.
• Keep these instructions
• Failure to respect these instructions may result
in burns or damage to the appliance. The
manufacturer is not liable for damage deriving
from failure to respect these instructions.
N.B.!
The appliance has a cooling fan.
This comes on whenever coffee, steam or hot
water is delivered.
After several minutes, the fan goes off automatically.
Cleaning and maintenance of materials in contact
with food
• The first time you use the appliance, or if it is not
used for more than 3 or 4 days, rinse all removable
accessories which may come into contact with
water or milk with hot water.
• If the appliance is not used for more than 3 or
4 days, before making the first beverage, rinse
the water circuit as described in this Instruction
for Use.
• You should carry out automatic cleaning and
guided maintenance scrupulously when proposed
by the appliance through the display or the lights
described in the manual.
6

Installing the appliance

IMPORTANT!
• Installation must be performed by a qualified professional
in compliance with legislation in force in the country of
installation (see section "Built-in installation").
• The packing elements (plastic bags, polystyrene foam,
etc.) should be kept out of reach of children.
• Never install the appliance in rooms where the
temperature may drop to 0°C or lower.
• Customise the water hardness as soon as possible
following the instructions in the "Water hardness"
section.

Connecting the appliance

DANGER!
Check that the mains power supply voltage corresponds
to the value indicated on the rating plate on the side of
the appliance.
Connect the appliance to an efficiently earthed and
correctly installed socket with a minimum current rating
of 10A only.
If the power socket does not match the plug on the
appliance, have the socket replaced with a suitable
type by a qualified professional. To comply with safety
directives, an omnipolar switch with a minimum contact
distance of 3 mm must be installed.
Do not use multiple sockets or extensions.
IMPORTANT!
Safety cutout devices must be included in the mains power
supply in compliance with the installation regulations in
the country concerned.