Resetting Default Values (Reset); Statistics; Buzzer; Adjusting Contrast - Fulgor Milano F7BC24 1 Série Manuel D'installation, Utilisation Et Entretien

IMPORTANT!
FAILURE TO DESCALE THE APPLIANCE REGULARLY
INVALIDATES THE GUARANTEE.

Resetting default values (reset)

If you change the original values, the default values can be
reset as follows:
• Press the icon (B2) ) to enter the menu and then press
the icons (B7) and (B8) until the machine displays the
message "DEFAULT VALUES".
• Press the OK icon (B9) and the machine displays the
message "CONFIRM DEFAULT VALUES".
• press the OK icon (B9) to return to the default settings;

Statistics

This displays statistics relating to the machine.
To display, proceed as follows:
• Press the icon (B2) to enter the menu and then the
icons (B7) and (B8) until "STATISTICS" is displayed.
• Press the OK icon (B9).
• Press the icons (B7) and (B8) to verify:
• How many coffees have been made.
• How many times the machine has been descaled.
• How many cappuccinos have been made;
• The total number of litres of water delivered.
• Press the icon (B6) once to exit the function or twice to
exit the menu.

Buzzer

This activates or deactivates the buzzer emitted by the
machine each time an icon is pressed or an accessory is
inserted/removed.
N.B.:
The buzzer is active by default.
• Press the icon (B2) to enter the menu and then the
icons (B7) and (B8) until "BUZZER" is displayed.
• Press the OK icon (B9). "BUZZER PLEASE CONFIRM" is
displayed.
• Press the (B6) icon (B6) to disable or the OK icon (B9)
to enable the buzzer.
• Press the (B6) icon (B6) to exit the menu.

Adjusting contrast

To increase or reduce the contrast of the display, proceed
as follows:
• Press the icon (B2) to enter the menu and then the
icons (B7) and (B8) until "CONTRAST" is displayed.
• Press the OK icon (B9).
• Press the icons (B7) and (B8) until the required
display contrast is reached. The progressive bar indicates
the level of contrast selected.
• Press the OK icon (B9) to confirm.
• Press the (B6) icon (B6) once to exit the function or
twice to exit the menu.
EN
25