Changing The Quantity Of Coffee In The Cup; Adjusting The Coffee Mill - Fulgor Milano F7BC24 1 Série Manuel D'installation, Utilisation Et Entretien

8 - Changing the quantity of coffee in the cup

EN
The appliance is set by default to automatically make the
following types of coffee:
• espresso
• small cup
• medium cup
• large cup
• mug
To change the quantity, proceed as follows:
• Press the icon (B2) to enter the menu (fig. 15). Press
the icons (B7) and (B8) (fig. 2) until "PROGRAM
COFFEE" is displayed.
• Press the OK icon (B9).

9 - Adjusting the coffee mill

The coffee mill is preset in the factory and should not require
adjusting. However, if after making the first few coffees you
find that delivery is either too fast or too slow (a drop at
a time), this can be corrected by adjusting the grinding
adjustment knob (fig. 14).
IMPORTANT!
The grinding adjustment knob must only be turned when
the coffee mill is in operation.
16
• Select the type of coffee you want to change by pressing
the icons (B7) and (B8).
• Press the OK icon (B9) to confirm the type of coffee you
want to make.
• Use the icons (B7) and (B8) to change the quantity
of coffee. The progress bar shows the quantity of coffee
selected.
• Press the OK icon (B9) again to confirm (or the icon (B6)
to cancel the operation).
• Press the (B6) icon (B6) (fig. 18) twice to exit the menu.
The appliance is now reprogrammed with the new settings
and is ready.
For slower delivery and creamier coffee, turn one click
anticlockwise (finer pre-ground coffee).
For faster delivery (not a drop at a time), turn one click
clockwise (coarser pre-ground coffee).