Changing The Quantity Of Coffee And Milk For Cappuccino; Changing The Quantity Of Milk; Changing The Quantity Of Coffee - Fulgor Milano F7BC24 1 Série Manuel D'installation, Utilisation Et Entretien

15 - Changing the quantity of coffee and milk for cappuccino

The appliance is set by default to automatically deliver a
normal cappuccino.
To change these quantities, proceed as follows:

Changing the quantity of milk

• Fill the container with milk up to the maximum level
indicated on the container.
• Press the icon (B2) to enter the menu (fig. 15), then
press the icons (B7) and (B8) (fig. 2) until "PROGRAM
CAPPUCCINO" is displayed.
• Press the OK icon (B9) to confirm. "PROGRAM MILK" is
displayed.
• Press the OK icon (B9) again.
• Select the quantity of milk required by pressing the
icons (B7) and (B8). The progress bar shows the quantity
of milk selected.
• Press the OK icon (B9) to confirm (or the
cancel the operation.
• Press the (B6) icon (B6) (fig. 18) twice to exit the menu.

Changing the quantity of coffee

• Press the (B2) icon (B2) to enter the menu (fig. 15),
then press the icons (B7) and (B8) (fig. 2) until
"PROGRAM CAPPUCCINO" is displayed.
• Press the OK icon (B9) to confirm then the
(B7 and (B8) (fig. 2) until "COFFEE FOR CAPPUCC." is
displayed.
• Press the OK icon (B9) again.
• Select the quantity of coffee required by pressing the
icons (B7) and (B8). The progress bar shows the
quantity of coffee selected.
• Press the OK icon (B9) to confirm (or the
cancel the operation.
• Press the icon (B6) (fig. 18) twice to exit the menu.
icon (B6) to
icons
icon (B6) to
EN
19