Kenwood KCA-iP500 Mode D'emploi page 10

Troubleshooting Guide
Use this guide for troubleshooting, when you
have difficulty in operating the unit or you cannot
play a song with an error message displayed on
Control unit.
?
Currently selected Browsing (Music menu)
item cannot be identified or not displayed.
✔
Control unit does not support a CD TEXT
(disc title) display function.
☞
Slide the "1" of "SELECT SWITCH" to up
position to lock on to "Playlists" (page 5).
Next, press the reset button on Control
unit.
?
Browsing (Music menu) items cannot be
selected.
✔
The "1" of "SELECT SWITCH" is set to up
position.
☞
Slide the "1" of "SELECT SWITCH" to
down position (page 5). Next, press the
reset button on Control unit.
?
Setting of the "SELECT SWITCH" is not
enabled.
✔
The "SELECT SWITCH" might be set with
KCA-iP500 connected to Control unit.
☞
Press the reset button on Control unit.
?
Songs cannot be selected.
✔
If a resume function is enabled, a song of
"track number 1, title number 1 in Playlist" is
automatically played when you try to select a
song.
☞
You can select a song after a song of
"track number 1, title number 1 in Playlist"
is played.
?
"LOAD"/ "Reading" is continuously
displayed on Control unit.
✔
Communication failure occurs between
KCA-iP500 and iPod.
☞
Disconnect iPod from KCA-iP500, make
sure "KENWOOD" is not displayed on iPod,
then reconnect.
If "LOAD"/ "Reading" is still displayed, reset
iPod.
10
|
English
?
iPod becomes inoperative after being
disconnected from KCA-iP500.
✔
Communication failure occurs between
KCA-iP500 and iPod.
☞
Reset iPod.
?
Playback stops.
✔
An external unit such as headphones has
been disconnected from iPod.
☞
Disconnect iPod from KCA-iP500, make
sure "KENWOOD" is not displayed on
iPod, then reconnect iPod.
Before reconnecting iPod, be sure to
disconnect all external units from iPod.
Messages
"RESUMING"
: Resume function is enabled. See <About
resume function> on page 6.
"EJECT"
: iPod is not connected. Make sure that iPod is
securely connected.
"NO DISC"
: A song corresponding to currently selected
Browsing (Music menu) item or title (title of
Playlist or album, for example) does not exist.
Select other Browsing item or title.
"ERROR 18"/ "E-18"
: Software version of the connected iPod is not
supported by KCA-iP500. See <Controllable
iPod> on page 3.
"ERROR 60"/ "E-60"
: Communication failure occurs between
KCA-iP500 and iPod. Disconnect iPod from
KCA-iP500, make sure "KENWOOD" is not
displayed on iPod, then reconnect iPod. If
"ERROR 60"/ "E-60" is still displayed, reset iPod.