Publicité
Temperature measurements
Energy measurements
Reset energy
values
Energy measurements are only available on the RVT12-3P (the 3 phase model is equipped
with a real time clock).
Energy values may be "Reset" to 0.
4.2.3
Waveform
Available voltage and current signals (depending on RVT type and connection used) and
the line current can be displayed on the screen as waveforms.
Figure 21
shows the
voltage wave form between line and neutral.
Select
waveforms
Figure 21: Voltage and current waveforms
Power Factor Controller RVT ç Measurements and Settings 31
Publicité
