Bergstrom LITE FORD F-Max H625 Instructions De Montage page 14

LITE
EN
5
Position the fastening mounts with a flat washer,
grower washer and M8/125x50 screw, without
tightening.
6
Screw on (4) L=87 M6 hexagons and tighten
with a torque of 4.75±10% Nm, as shown in the
photo.
7
Position the console supplement as shown in
the photo, and align the unit. The grooves in the
base must first be checked to ensure they are not
visible and are supported on the EPDM seal.
7
5
6
7
14