Ryobi ESS200RS Manuel D'utilisation page 5

GB
FR DE ES
DESCRIPTION
1. Switch trigger
2. Variable speed control selector
3. Overmold handle
4. Dust collection box
5. Sanding pad
6. Paper clamp
7. Live tool indicator
8. Hook and loop sandpaper
9. Non-adhesive sandpaper
SPECIFIC SAFETY INSTRUCTIONS FOR
SANDERS
Always wear safety goggles and a dust mask when
sanding, especially sanding over-head.
The machine is not suitable for wet sanding.
Do not use sanding paper larger than needed.
Extra paper extending beyond the sanding pad can
also cause serious lacerations.
The dust collection box shall be equipped with the
tool. It should be emptied frequently. To connect dust
collection box, insert the adapter of dust box to the
dust-collection opening on the rear end of the sander.
Do not throw sanding dust on an open ¿ re because
materials in ¿ ne particle form may be explosive.
A suitable breathing respirator must be worn while
sanding lead paint, some woods and metal to avoid
breathing the harmful/toxic dust or air.
SPECIFICATIONS
Model ESS200RS
Power 200 W
230 V - 240 V
Voltage
50 Hz
No-load speed 12000 min
Orbital diameter 2.0 mm
Weight 1.5 kg
FEATURES
See Figure 1.
IT NL PT DK SE
WARNING
WARNING
ESS280RV
280 W
230 V - 240 V
50 Hz
7000-12000
-1
-1
min
2.0 mm
1.7 kg
FI NO RU PL CZ
English
Your sander is suitable for sanding with coarse, medium
and ¿ ne grit sandpaper. It will produce a ¿ ne, scratch free
¿ nish when used to sand with the grain on wood surfaces.
It has been designed so that À ush corner sanding on three
sides of the sander is possible.
Your sander has a comfortable palm grip handle that
provides maximum one-hand comfort and reduces
operator fatigue during continuous sanding operations.
Before using this product, familiarize yourself with all
operating features and safety requirements. However, do
not let familiarity with the tool make you careless.
SWITCH
Electronic speed control
The electronic speed control allows the operator to adjust
speed to meet a variety of sanding material from tough
heavy grained timber to delicate veneer.
This tool is equipped with a simple switch control.
Turn on the sander: Slide the switch to "|".
Turn off the sander: Slide the switch to "O".
Do not allow familiarity with tools to make you careless.
Remember, a careless fraction of a second is suf¿ cient to
inÀ ict severe injury.
DUST COLLECTION BOX
The dust collection box attaches to the sander and keeps
dust to a minimum.
VARIABLE SPEED (MODEL - ESS280RV)
Your sander has advanced electronic features, designed
to assist you in getting the maximum use from your
sander. By making proper speed selections, your tool can
be adjusted to speci¿ c sanding needs.
The electronic feature of your tool introduces the À exibility
of adjusting the motor speed to required job conditions. An
electronic speed control module senses the load applied
to the motor and increases or decreases motor voltage to
compensate for and maintain desired RPM. Speed can be
set according to the sanding purpose or the surface of the
workpiece you will be using.
Select clockwise to increase speed for rough surfaces or
for quick removal of stock and anti-clockwise to decrease
speed for the smaller, delicate sanding applications.
1
HU RO LV LT EE
WARNING
HR SI SK GR TR