Publicité
Les langues disponibles
Les langues disponibles
Problems and possible causes
The oil is still too hot.
The Oil box control button is not
on the Automatic Oil Filtration
position.
The filter grid is blocked or
clogged.
The shortening has solidified.
The max (3.5 l) fill mark for the
bowl has been exceeded.
There is some oil left in the
container or it is full.
The oil has deteriorated.
The oil is unsuitable.
If you hear slight popping sounds
when using your appliance, it
means that there is too much
water in the frying oil.
The danger comes from water
being found in the oil box inside
the removable bowl (as a result
of the filtering process)
21
The bowl does not drain
• Wait for the temperature to go
down (approximately 3 hours).
• Turn the Oil box control button
on the Automatic Oil Filtration
position.
• Empty the oil into a container
and clean the filter grid with
soap and water and a non-
metallic brush. Press on the red
button under the fryer to let out
water and crumbs.
• Allow the fryer to heat (4 to 5
minutes).
Oil leaks
• Do not exceed the oil level
(3.5 l). Clean the fryer before
any use.
• Turn the Oil box control button
on the Oil box position, pull out
the container and drain it.
Emits unpleasant smells
• Use new oil.
• Use a good quality blended
vegetable oil.
Noise during frying
• Change the oil.
Solutions
Publicité
